Borosilicate glass withstands thermal shock & chemical attack better than most other kinds and is the material of choice for use in many chemistry glassware.

Chemistry glasswarecannot be returned for any reason; this is for your safety and ours. It would be prohibitively expensive to test for bacteriological, chemical or radiological agents since there is no way to tell if glass has been contaminated just by looking at it. We would have to throw it away even if you claim to never have opened the package.

Beakers. Borosilicate science lab glass beakers can be used for routine mixing, measuring and boiling. Similar to pyrex beakers in chemical composition, they can be used for all the same basic aqueous measuring, mixing and heating applications where a glass lab beaker is required.

Boiling Flasks. These borosilicate boiling flasks (florence flask) are made to ISO 1773 and are highly resistant to breakage due to heating or chemical attack. A flat bottom boiling flask can be used on a wire mesh, a round bottom one needs a clamp and bosshead. Use instead of an erlenmeyer flask if vigorous boiling is required.

Burets. Glass burets (burettes) have a variety of applications and are used mainly where accurate amounts of liquid must be added in small amounts. A class B buret will suffice for most non-analytical applications such as acid-base titrations and measuring motor oil for motorcycle racing.

Erlenmeyer Flasks. An erlenmeyer flask is commonly used for simple measuring, storing and mixing of liquids. They can be used as wine or juice containers, culture chambers and brewing vats. We supply cork and rubber stoppers to fit them but for many applications, a piece of cellophane (parafilm) will also work. These flasks are autoclavable. We have cycled them repeatedly without any failures.

Funnels. We carry 250, 500 and 1000ml separatory funnels with glass stopcocks and teflon (PTFE) and stoppers.

Graduated Cylinders Graduated cylinders are handy for accurate measurements of small volumes of liquid that cannot be done with beakers and flasks. A borosilicate glass graduated cylinder should be used instead of other materials such as polypropylene and TPX if you are going to use oxidizing materials and certain hydrocarbons which can cause plastic to cloud.

Pipets. These class B, blowout measuring pipets are accurate to 0.1% and are ideal for measuring small volumes for doing chemical titrations and serial dilutions for naturopathic medicine tinctures used in homeopathic remedies and other new age therapies. A glass measuring pipet is an autoclavable (sterilizable), reusable, economical alternatives to disposibles.

Test Tubes. Test tubes are among the most common of requirements for lab supplies. The 18x150mm is considered the standard lab test tube size. The largest, 25x150mm will hold a cigar or spices. A culture tube is a test tube without a lip.

Volumetric Flasks. Volumetric flasks are used in analytical chemistry to produce accurate solutions. However, they can be used as decorative glassware around the home for holding salad dressings, etc. This brand of volumetric flask is made to ISO 1402 standards and are class "B" accuracy. Stoppers are included.

Watchglasses. Watch glasses have all kinds of uses. They are concave "dishes" that can be used as beaker lids; to hold protists and other invertebrates for viewing under a microscope; or to dissolve materials such as crystals and powders.

Lab glassware refers to a variety of equipment, traditionally made of glass, used for scientific experiments and other work in science, especially in chemistry and biology laboratories. Some of the equipment is now made of plastic for cost, ruggedness, and convenience reasons, but glass is still used for some applications because it is relatively inert, transparent, more heat-resistant than some plastics up to a point, and relatively easy to customize. Borosilicate glasses—formerly called Pyrex—are often used because they are less subject to thermal stress. For some applications quartz glass is used for its ability to withstand high temperatures or its transparency in certain parts of the electromagnetic spectrum. In other applications, especially some storage bottles, darkened brown glass is used to keep out much of the outside light so that the effect of light on the contents is minimized. Special-purpose materials are also used; for example, hydrofluoric acid is stored and used in polyethylene containers because it reacts with glass.

Laboratory glassware and equipment, and thorough cleansing

In the chemical and pharmaceutical laboratories, with extensive use of glass to produce a wide range of potential pollutants, which cleaning agents and cleaning methods is a serious challenge. In use, cleaning agent must be a valid and reliable, but can not leave any residue. The final analysis, every time you use the glassware must be thoroughly cleaned.

Thorough cleansing can be achieved

Borer Chemie AG in a water-based cleaning technology has been the cutting edge of more than 40 years. Glassware for laboratory manual and automatic cleaning of high-quality product development, we have a worldwide reputation. We offer a full range deconex good cleaning agent and non-silicon lubricant.

Purposes outlined in

¦ phosphorus and phosphorus-containing cleaning agents for cleaning laboratory glassware of the manual.

¦ non-surfactant cleaning agent, and neutralizer of laboratory glassware used in the automatic re-processing.

¦ tank for heating, wash basin and stainless steel high-performance surface cleaners.

¦ used for sealing, lubricating oil and glass joints, non-silicon lubricant.

More reliable for manual cleaning

Choosing the right cleaning agent is essential, because hand-washing is generally carried out at room temperature without any auxiliary machines. In addition, there is no standard washing process. Borer Chemie AG in this area is a recognized expert, has produced a number of high-performance concentrated liquid. They have a wide range of uses, and after washing, as to leave no residue.

Fully automatic washing / re-processing

Self-cleaning for the best Borer Chemie AG liquid and powder products can ensure that the washing machine to remove residues. We provide the cleaning agent used for the following purposes:

¦ Alkalescence, especially mild cleansing process - the application of these products at the same time easy to clean corrosion on components.

¦ non-phosphorus-containing, environmentally friendly cleaning process - analysis of these products in many laboratories have made use of a great success.

¦ For stubborn dirt in particular, the use of alkali cleaning process

For us you can expect to be more

¦ Our neutralizer is a cleaning agent and does not contain surfactants, and therefore is more environmentally friendly. We do not use any ingredients derived from animals.

¦ Determination of the residues, the analysis of each product is fully confirmed.

¦ According to a large number of experiments or practical experience, many laboratory containers are recommended by the manufacturer of our products.

¦ You can believe that we clean for you to find a solution - we have excellent customer service reputation.

For water-based cleaning agents and chemical and pharmaceutical laboratories for professional use in the cleaning process, Borer Chemie AG is a global expert. We are committed to technical knowledge, innovation, responsiveness and environmental awareness. We look forward to working together!

Precision and stability of the results of the analysis from the cleaning agent used in the quality.

Laboratory glassware cleaning the remnants of what kind of cleaning agent?

The answer: deconex ® series of water-based cleaning concentrate.

Analysis of the results - the accuracy and stability

Residues of cleaning agents will lead to erroneous results. Therefore, high-precision analytical equipment requirements of the best cleaning method to ensure the stability of results.

From Borer Chemie AG.'s Deconex ® products have always maintained the most cutting-edge production technology.

The use of our products to ensure that you can ensure a stable and accurate results.

Manual pre-cleaning or washing

Immersion or ultrasonic bath

Choice does not contain phosphorus or surfactants containing products. deconex product line is highly versatile - not limited to the use of. In addition, we also provide 1 micron pore size filter of special products.

Weak alkaline, phosphorus, the scope of a wide range of cleaning and high-swelling force.

If followed to deal with self-cleaning process, you do not need the middle of the process of washing.

Alkaline, surfactant-free, phosphorus, 1 micron pore size filter, but also to self-cleaning process.